Rugged Keypad for Any Application
The question isn’t 'Can the PowerKey Pro keep up with my rugged equipment?' But
rather, 'Can your rugged equipment keep up with the PowerKey Pro?' With an IP67/NEMA6
rating, the PowerKey Pro was built with the harshest conditions in mind. It is virtually
immune to water, mud, salt, sand, oil, chemicals, pressure washers or anything else
thrown at it. It can also withstand years of sunlight/UV exposure, making it the
ideal keypad for outdoor equipment, transportation vehicles, industrial controls
or anything else not afraid to get down and dirty!
CAN-Bus Keypad for Ultimate Flexibility
The PowerKey Pro was built with two things in mind, make it tough and make it flexible.
So we made the PowerKey Pro reprogrammable, relegendable and open. That’s right,
open. The PowerKey Pro is an open protocol CAN-BUS keypad that can speak any language
your system does, including RS-485, RVC, CAN-OPEN, NMEA2000, J1939 and others.
We also believe the most important keypad configuration is your own. So we made
reconfiguring the keypad as simple as possible. The address, button functions and
LED indicator statuses can all be reprogramed within the keypad itself. Just plug
it into your PC and you are good to go.
Watch the video below to see it in action!
Standard Features
- Reconfigurable Keys
- Flush-mount or front-mount
- ON/OFF, momentary, toggle & scroll
- Relegendable buttons
- Snap dome positive tactile feedback
- Over 100 stock icons to choose from
|
- LED state & status configurable
- LED backlit icons
- Supply voltage: 12 - 24 VDC
- Sealed (coated solicone rubber)
- Vertical or horizontal mount
- Multicolor indicator ring
|
|
Back to Top
|
Custom Options
Communication protocols
- RS485
- CAN-OPEN
- J1939/J1939-11
- SMARTCRAFT
- RVIA/RVC
- NMEA 2000
- And more
Insert Legends
- Overlay
- Laser Etch
- Pad Print
-
- Blank
- Clear Insert
- Black Insert
- And More
|
Accessories
- Configuration Manager
- Bezel
- Connector
-
- Deutsch
- Molex
- Micro-C
- And More
|
|
Back to Top
|
Specs
|
Environmental Tests
|
Standards Reference
|
Criteria
|
|
Operating Temperature High
|
SAE J1211 level 2
|
85° C, 24 hours
|
|
Operating Temperature Low
|
SAE J1211 level 2
|
-40° C, 4 hours
|
|
Storage Temperature High
|
SAE J1211
|
+85° C, 24 hours
|
|
Storage Temperature Low
|
SAE J1211
|
-40° C, 24 hours
|
|
Thermal Shock
|
IEC 60068 2-27
|
-40° - +72°C @ 4C/Min
|
|
Humidity
|
Mil STD 202G
|
Test Method 104A
|
|
Solar Radiation
|
ASTM D4329
|
UVB 400 hours
|
|
Ingress Protection (Sand/Dust/Water)
|
IP67
|
1m/1 hour
|
|
Ignition Protection
|
SAE J1171
|
Protected Device
|
|
Salt Spray
|
ASTM B117
|
700 hours
|
|
Chemical Resistance (24 hr exposure)
|
N/A
|
DEET, Engine Cleaner, Isopropyl Alcohol, Suntan Lotion, Multi-Purpose Cleaner, Orange
Citrus Cleaner
|
|
Electromagnetic Compatibility
|
Standards Reference
|
Criteria
|
|
RF Radiated Emissions
|
EN 55011 B
|
30-1000 MHz
|
|
RF Conducted Emissions
|
IEC 60945
|
150 kHz - 30 MHz
|
|
Surge Immunity
|
EN 61000
|
+/-500V - 50 uSec
|
|
Physical Tests
|
Standards Reference
|
Criteria
|
|
Mechanical Shock
|
IEC 60068 2-27
|
X,Y,Z 50Gs 11ms
|
|
Vibration
|
IEC 60068 2-6
|
X,Y,Z 10-150Hz 0.15mm amp
|
|
Switch Life
|
N/A
|
3 million operations
|
|
Electrical Performance
|
Standards Reference
|
Criteria
|
|
Electrostatic Discharge
|
EN 61000 4-2
|
4k Volts
|
|
Electrical Fast Transients
|
EN 61000 4-4
|
0.5kV 50 nanoseconds
|
Back to Top